Tech Section > Recording Software

help for the vocal

(1/2) > >>

ayocanye:
i am using mbox 2, imac G5, and  Pro tool 8. I record a vocal track but my voice seems to sound too low, but i already turn the peak to the louders. and still kina low.  what can i do to gain up the volume?   can u tell me specific, cause i am new.

stainless:
what is your signal chain (microphone? what's it plugged into?)

do other things you record have enopugh volume?  Are using the same mic to record other things

ayocanye:
what is your signal chain (microphone? what's it plugged into?)
it plugged into mbox 2
do other things you record have enopugh volume?  Are using the same mic to record other things
No, i just record my vocal.         

stainless:
what kind of mic are you using???

Doesn't the M-Box have 2 input channels? If so, try recording a track to one channel, move mic to second (and set the volume/gain the same0 and record aging (sing the same thing)

compare the waveforms to see if they're both the same (trying  to rule out if it's a problem with the pre-amp circuitry in the M-Box)

ayocanye:
what kind of mic are you using???
at2020 condenser mic.

Doesn't the M-Box have 2 input channels? If so, try recording a track to one channel, move mic to second (and set the volume/gain the same0 and record aging (sing the same thing)
yea, it have too input channel. i'll try.

compare the waveforms to see if they're both the same (trying  to rule out if it's a problem with the pre-amp circuitry in the M-Box)

Navigation

[0] Message Index

[#] Next page